10A 12V PWM Solar charge controller equipped with a microcontroller suitable for Lead acid (GEL, AGM, flooded) battery type

10A 12V PWM Solar charge controller equipped with a microcontroller suitable for Lead acid (GEL, AGM, flooded) battery type
  • Продавецrapturewatch.us
  • Список ценUS $103.50piece
  • Продажная ценаUS $103.50piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,6 (822)

Oписание продукта

12V 50A High frequency lead acid battery charger from Negative Pulse Tech



Input voltage :   110V or 220VAC, 50-60Hz
Output voltage: 14.7 or 29.4 or 44.1 or 58.8 or 73.5 or 88.2 or adjust to battery specification
Cooling: Fan cooling
Appropriated Battery: 12V or 24V or 36V or 48V or 60V or 72V battery
Charger Type: 7 step, full automatic switch mode
Dimensions: 260*130*70mm
Net Weight:2.8kg


Main Features: 

1. Automatic Charging

MCU system is applied. The whole charging process is monitored. Multi-stage
charging is automatically proceeded. Automatically stops charging when the
battery is full. You can leave the charger connected to the battery indefinitely
without the risk of overcharging; Once the battery is full, the charger monitors the
battery voltage and intermittent to float charging the battery if the capacity of your
battery lower than our charger\'s preset digital.

2. Compact and convenient

Small and light as we adopt the switch mode technology Or we call Switching
Power Supply, this is different from Linear Power using in traditional charger.
More than 85% electric energy was transferred to battery chemical energy during
charging process comparing with 40% of conventional charger. The tech is
suitable for all types of batteries (wet, maintenance free, VRLA, AGM, etc)

3. Digital Display and More Protection

Voltmeter and Ammeter will show battery\'s voltage  on display screen.
LED indicators will show pulse and reverse pulse charging as well as how much
Polarity Protection: Prevents the output leads from sparking due to accidental
reverse connection or short circuit,
Overcharge Protection: never worry about overcharging as charger
automatically stops when battery is full.
High Temperature Protection: If charger itself gets to high temperature, it will
automatically lower down its temperature even stop working so that charger is
well protected.

4. Maintain battery and recover it\'s capacity

Pulse and reverse pulse charging technology is applied. The charger generates
pulse and reverse pulse to reduce battery impedance, gassing and temperature
rise, restore the sulfate into liquid to recover battery capacity. So that the charger
can maintain battery and prolong its lifetime.


We can change parameter to meet different applications. Make charger specially
for your battery.

6. CE and RoHS Certification

We have CE and RoHS certification.