EM Lock:
Features:
Use magnetic power to lock the door, 280kgs (600lbs) holding force.
Built-in reverse current protection device (MOV).
Alluminum shell adopts high strength material, with hard anodised processing.
Corrosion resistant.
Good quality and durable to use.
Can be opened by push button, remote controller, etc.
Fit for wooden door, metal door, glass door, fireproof door, etc.
Specifications:
Holding force: 280kgs
Voltage: DC 12V
Current: 380-450mA
Working temperature: -10 to 55 Celsius degree (14 to 131 Fahrenheit degree)
Humidity: 0 to 95%
Working mode: power-on to lock
Lock size: 25 * 4.6 * 2.5cm
Plate size: 18 * 3.8 * 1.6cm
Package weight: 2KG



Power supply:
Features:
100% Brand New.
Size: Approx. 212 x 172 x 70mm(L x W x H)
Weight: 1.1kg
Input voltage: 110~240v
Input Frequency: 50~60Hz
Output voltage: DC 12V
Output Current: 5A
Output voltage trim range: ±10%~ ±15%
Insulation voltage: Junior/sub-polar inter-1500v ac, primary/shell between 1500V AC, subpolar/shell between 500V AC
Hold time: full load typically 20ms
Operating temperature: -20~ ±35 degree
Overload protection: All output in a short circuit, overload are protected; Power output of 0-15 seconds delay locks
Exit Button:
Product Description:
Door release buttons are the most common and the frequently used in the access control systems. They are often used in public authorities, banks, large, small and medium-sized enterprises, department stores and residences.
Specification:
Dimensions | 86Lx86Wx25H(mm) |
Input | DC12V |
Contact Rating | [email protected] Max |
Output Contact | NO\\COM |
Mechanical Life | 500000 tests |
Suitable for Door | Hollow Door |
Operating temp | -20~+55 degree(14-131F) |
Suitable Humidity | 0-95% (relative humidity) |
Color | Silver |
Weight | 0.2kg |
Standard Packing | 60pcs/carton |


Wired door bell:
Specifications:
- Wired door bell 12V for security access control
- 100% Brand New and high quality
- Features a bell sound, small size and wall-mount hole, very easy to install
- Switch is not included
- Working Voltage: DC 12V
- Dimension:
- Approx. 87 (W) x 62 (H) x 23 (D) mm
- Approx. 3-1/2" (W) x 2-1/2" (H) x 1" (D) inch
- Material: Plastic
- Color: White
Wiring Instructions:
- Red +12V
- Black GND
- Yellow SWITCH
- Green SWITCH
Remote control:
Product instroction
The company receives the remote control board, suitable for security alarm, remote control electric doors and Windows, signal control, industrial control, the electric control circuit of lifting equipment, etc. All remote control switch module, relay contact output independently, is very suitable for direct control of various load; Products adopt wireless fixed code technology, omnidirectional, noninterference switch. 12 v remote control switch, the power supply proposal with more than 500 ma dc regulated power supply.
Specification:
1. Transmitter
Channel: 1 CH
Remote Control Distance: 0-50m
(Please notice that is the ideal distance without any block and signal interfere, it would rise and fall about 10%-50% with the block and signal interference.)
Encode: Fixed code, soldering 2260 2262
Frequency: 315MHz or 433MHz (Default 315MHz)
2. Receiver
Channel: 1CH
Power Supply (Operating Voltage): DC 12V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Sensitivity: -105 dBm
Operating Temperature: -40 C ~ +80 C
Size: 70mm*50mm*18mm
Output way: Inter-lock